Radio Mode: Basic Functions; Selecting The Waveband; Searching For A Station - Medion LIFE P62004 Mode D'emploi

Radio mode: Basic functions

Selecting the waveband

Press the BAND button to switch between FM (F1, F2, F3) and medium
wave (MW1 and MW2). You can store up to 6 stations in each band.
The three bands FM1, FM2 and FM3 and the two bands MW1 and MW2
each cover the same frequency range. This is how you can save up to 18
stations in the FM band and 12 stations in the MW band.

Searching for a station

Search automatically
Briefly press either the
search. The device will search for the next station automatically.
To stop the function, press
Manual search
If you hold down the
to manual search mode. The display shows
Change the value again with
Searching for an AF station
In AF mode the radio automatically changes to a station in the FM band with
an alternative frequency which transmits the same programme when
reception of the original frequency is too weak ("AF" = "Alternative
frequency") (Refer to "Alternative frequencies (AF button)", page 25).
To turn AF mode on press the AF button once. The display will show the
AF indicator.
In one of the bands FM1, FM2 or FM3 press the
the FM band in order to find stations that are broadcasting an AF signal.
The search stops each time a station is found.
To deactivate AF mode press the AF button again. The indicators
disappear.
On delivery or after a reset AF mode is switched on.
MD 82309
or button to start the automatic station
or again.
or button for a bit longer the radio switches
or .
.
MANUAL
or button to search
UK
UK-23