Inserting The Radio Into The Iso Slot - Medion MD 80907 Notice D'instructions

Installation

Inserting the radio into the ISO slot

• Before installation always remove the two
transportation safety screws in the top radio
casing (recognizable because of their red
flags)!
Assembly
The car radio can be fitted in any standard ISO slot for car radios. If your vehicle
has no ISO slot, please consult a specialist workshop, dealer, or the specialist
department of a car equipment warehouse.
• Now remove the mounting frame from the casing of the car radio.
• Insert the mounting frame in the ISO installation slot.
• Bend the flaps in
the mounting
frame with a
screwdriver so
that it is fixed
firmly in place in
the installation
slot (see
diagram).
• Check that the frame is held securely.
• Now connect the car radio's ISO block to the vehicle's two ISO plugs.
• Connect the vehicle's antenna cable to the radio antenna socket.
• Push the car radio carefully into the slot until it fits securely.
GB-8