Southbend TruVection TVGS-12SC Manuel D'utilisation page 29

T V G C
RU ECTION AS ONVECTION
ADJUSTING DOOR CHAIN MECHANISM
The door chain mechanism causes the left and right doors to open and close together. To adjust the door
chain mechanism, do the following:
1. Remove lower front panel that covers the door chain mechanism (shown below).
2. Close both doors.
3. Check the positioning of the chain on the sprockets. There should be five regular links and one master
link visible on the front side of each chain. If not, open the turnbuckles and reposition the chain over the
sprockets.
4. Adjust the turnbuckles so that the right door closes about 1/4" to 1/2" inch ahead of the left door. The
left door should be pushed tight over the friction catch so both doors are completely closed against the
frame.
5. Secure the turnbuckles by tightening their locknuts.
Door Chain Adjustment
Turnbuckles
O '
WNER
O
VENS
M 1194658
S ANUAL
A
DJUSTMENTS
P
AGE
29