Product Description; Technical Datas - CLAS OP 5060 Mode D'emploi

OP 5060
PNEUMATIC GUN FOR 370mm CARTRIDGES AND BAGS
COMPOSITION

TECHNICAL DATAS

Cartridge ≤310ml
Bags ≤600ml
Lenght: 410mm
Height: 263mm
Width: 78mm
Weight:1565g
Connection: 1/4" male
Pressure max.: 10bar/ 145psi
Noise : >80dBA. The use of ear defenders is recommended.
STORAGE
The gun is supplied in a single KEB WHITE ST/B343 cardboard box, with a 2.8-3 mm. thickness
low fl ute; the gun is held in a polyethylene bag.
Keep at a temperature between -5°C and 45°C, with ambient humidity not exceeding 70%.
Never remove the pressure reducer from the machine in an attempt to increase the inlet
pressure. The applicator is safe up to 10 bar 145 PSI. Do not use any other expedient to
increase the pressure.
To properly use the applicator, with one hand, hold the back of the material tube up
against the nut and with the other, grasp the grip to operate the control lever.

PRODUCT DESCRIPTION

1 - Body gun
2 - Front ring nut
3 - Control lever
4 - Handle
5 - Pressure regulator
6 - 1\4 gas male threated connector
7 - Material holder tube
8 - Dump valve
9 - Rear ring nut
10 - CE mark
11 - Exhaust air outlets
12 - Safety hole