Ice-Maker - Grundig GSBS14621FX Mode D'emploi

5.16 Ice-maker

(Optional)
Ice maker is located on the upper
section of the freezer cover.
Hold the handles on the sides of
the ice stock reservoir and move
up to remove.
Remove the ice-maker decorative
lid by moving up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir from
the handles, then move up and pull
the ice stock reservoir. (Figure 1)
To reinstall the ice reservoir
Hold the ice stock reservoir from
the handles, move up with an angle
to fit the sides of the reservoir
to their slot and make sure that
the ice selector pin is mounted
properly. (Figure 2)
Push downwards firmly, until
there is no space left between the
reservoir and the door plastic.
(Figure 2)
36
If you have difficulty in refitting the
reservoir, turn the rotary gear 90°
and reinstall it as shown in the
figure3.
Any sound you hear when the ice
drops into the reservoir is a part of
normal operation.
When the ice dispenser does not
work properly
If you do not remove ice cubes
for a long time, they will cause
formation of ice chunks. In this
case, please remove the ice stock
reservoir in accordance with
the instructions given above,
seperate the ice chunks, discard
the inseparable ice and put the
ice cubes back into the ice stock
reservoir. (Figure 4)