Speaka Professional 1429566 Mode D'emploi page 3

Operating instructions
3-port UHD HDMI switch
Item no. 1429566
Intended use
The product is intended for connecting 3 video devices with HDMI output and for playback via
a TV or a projector with HDMI input. Use the HDMI switch or the provided IR remote control for
switching. The product includes an IR extension cable in order to allow for a more convenient
placement of the IR receiver at the site of installation. Power is supplied via connected HDMI
cables.
It is intended for indoor use only. Do not use it outdoors.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short-circuiting, fire etc. Read
the instructions carefully and keep them for future reference. Make this product available to
third parties only together with its operating instructions.
The product corresponds to the legal, national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• HDMI switch
• IR extension cable (115 cm) with 1x foam, self-adhesive on both sides
• 4x rubber feet
• Remote control (with 3 V button cell)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in these operating instructions, we assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapors and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. Allow
the device to reach room temperature before connecting and using it. This may
take several hours.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Batteries
• Please ensure the correct polarity when inserting the battery.
• The battery should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin. Therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
• Do not disassemble, short-circuit or throw batteries into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
Operating elements
1 2 3 4 5
IR Auto IN1 IN2 IN3
HDMI OUT HDMI IN3 HDMI IN2
12 11 10
Operation
a) Installation and connection
• If desired, attach the provided rubber feet to the bottom of the device. Please be reminded
that rubber feet can leave marks on sensitive surfaces.
• Switch off all devices to be connected before the cables are connected.
• Connect the HDMI outputs of your playback devices (e.g. DVD player, media box) to the
HDMI IN1, IN2 and IN3 sockets (9, 10, 11).
• Connect the HDMI OUT socket (12) to your output device (e.g. TV or projector).
• Connect the IR extension cable to the IR socket (1). In order to connect the IR receiver at
the end of the extension cable permanently, attach the provided double-sided, self-adhesive
foam piece to the smooth bottom and then to a suitable surface. The installation location of
the IR receiver must allow for unobstructed transmission of the remote control signal. Please
note that the self-adhesive foam can leave marks when removed in the future.
• After having connected all cables, turn on your devices.
In order to guarantee interference-free transmission, the maximum length of the
standard HDMI cable (AWG 26) used must not exceed 6 meters.
b) Remote control
• Carefully pull the protective foil from the battery
compartment on the bottom of the remote control. That will
activate the operation of the remote control. Reinsert the
foil into the battery compartment when not using the remote
control for a longer period of time.
• Use the remote control buttons for the following functions:
Switch the device on/off, activate/deactivate the auto
function, and select HDMI inputs.
• Always point the IR remote control sensor at the IR receiver. Objects located between the
transmitter and the receiver, such as furniture, can obstruct the signal transmission. The
range of the remote control accounts for a max. of 6 meters.
• The battery can last for up to one year. It depends on different factors, such as battery quality,
ambient conditions, and frequency of use.
• When the remote control signal starts to get weaker, e.g. when signals are transmitted
irregularly or not at all, the battery must be replaced. Open the battery compartment as
indicated on the back side of the remote control and replace the exhausted CR2025 3V
button cell by a new battery of equivalent type.
1 Connection IR
6 7 8
2 Indicator lamp Auto
3 Indicator lamp IN1
4 Indicator lamp IN2
Switch
5 Indicator lamp IN3
6 Switch button
7 Standby indicator light
8 On/off switch
HDMI IN1
9 HDMI IN1 socket
10 HDMI IN2 socket
11 HDMI IN3 socket
12 HDMI OUT socket
9