Items Supplied And Device Overview - Beem Classico 03428 Mode D'emploi

EN
• The mains cable must not hang down from the surface on which the device is placed
in order to prevent the device from being pulled down.
• Switch off the device and pull the mains plug out of the plug socket if an error occurs
during operation, when there is a power cut or before a thunderstorm.
• Never pull or carry the device by the mains cable. When you pull it out of the plug
socket, always pull on the mains plug and never the mains cable!
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures,
persistent moisture, wet conditions and impacts.
• Use only original spare parts from the manufacturer.

Items Supplied and Device Overview

NOTES
• Never remove the rating plate and any possible warnings!
• Keep the original packaging during the warranty period of the device so
that the device can be properly packaged up if it needs to be returned. The
warranty claim shall lapse if any damage is caused during transport.
1. Unpack the items supplied and check them for completeness and transport damage.
If the device, the mains plug or the mains cable does have damage, do not use the
device(!), but contact our customer service department.
2. Remove all packaging materials and any possible protective fi lms used for protection
during transportation.
Key
(See fold-out page for illustrations)
1 Water tank lid
2 Water tank
3 Control panel
4 Release button for the milk tank
5 Milk froth dial
6 Milk tank cover
7 Lever for the milk nozzle
8 Milk nozzle
9 Milk container
10 Drip tray
11 Cover for the drip tray
12 Portafi lter
03428_DE-EN-FR-NL_A5_V3.indb 28 03428_DE-EN-FR-NL_A5_V3.indb 28
28
12.01.2018 11:24:43 12.01.2018 11:24:43