Beem Classico 03428 Mode D'emploi page 139

Masquer les pouces Voir aussi pour Classico 03428:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 50
EN
Preparation
NOTES
Do not operate the device without water. If this does happen, the device issues an
error message (several beeps in succession) (see the "Troubleshooting" chapter).
Never use the device without a suitable container below the coffee outlet and
the milk nozzle.
The device remains in operation and the control panel is lit up for up to 30 minutes
after the last action. During this time, the water in the water tank (2) and the cup
warmer (15) are heated. Once 30 minutes have elapsed, the device needs to be
switched on again using the button
If the brewing process is to be aborted prematurely, press the chosen button
again. You will hear a beep, and the control panel is fully lit up again. The device is
in stand-by mode.
Espresso / Double Espresso
The perfect amount of espresso to suit your own taste can be programmed in the
device (see the "Handling and Operation" chapter | "Programming Quantities")
1. Fill the water tank (1) (see the "Handling and Operation" chapter | "Filling the Water
Tank").
2. Insert the fi lter you want into the portafi lter (12) (see the "Handling and Operation"
chapter | "Inserting / Removing the Filter in the Portafi lter").
3. Fill the fi lter with coffee powder (see the "Handling and Operation" chapter | "Filling
the Filter With Coffee Powder").
4. Insert the portafi lter into the device (see the "Handling and Operation" chapter |
"Inserting / Removing the Portafi lter").
5. Press the button
panel fl ashes during the heating process.
If the milk tank is not inserted, only the button 
(17) for two espressos can be selected. Accordingly, the control panel is also
only lit for these buttons.
6. Place one or two suitable cup(s) under the coffee outlet (14).
For small cups, the device has a fold-down deposit surface (13) on the housing.
Simply fl ip this down (Picture F).
7. As soon as the device has heated up, the control panel stops fl ashing. Press the
button 
for an espresso or the button
03428_DE-EN-FR-NL_A5_V3.indb 34
03428_DE-EN-FR-NL_A5_V3.indb 34
(16) to prepare another speciality coffee.
(16) to switch on the device and preheat the water. The control
 (24) for an espresso or the button
for two espressos or a double espresso.
34
12.01.2018 11:24:44
12.01.2018 11:24:44

Publicité

Table des Matières
loading

Table des Matières