DETOMASO DIGITAL DT1009 Instructions D'entretien page 24

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

eN
B.INSTRUCTIONS - continued -
b. Press key B to move the flashing displays in the following order and make the settings:
c. Press key D while a display is flashing to set it.
d. Press key C to return to countdown mode.
e. to set the start of the countdown time to 24.00 hrs set it at 0:00 00.
Timer operation
a. Press key D to start or stop the timer. Press key C to return to the initial start position when you
are finished.
6. Chronograph
The display range of the Chronograph is 23 hours ,59 minutes ,59.99 seconds.
elapsed time
D Key
D Key
Start
Stop
Spilt time
D Key
C Key
Start
Split
("SPL" angezeigt)
Two Finishes
D Key
C Key
Start
Split
7. Two time zones
a. Press and hold key C for 2 seconds to enter the 2-time zone mode. The hour display flashes. Press
key B to select the following sequence:
b. Press key D to set the flashing displays.
c. Press key C to return to 2-time zone mode.
23
D Key
D Key
Re-start
Stop
C Key
D Key
Split release
Stop
D Key
C Key
Stop
Split release
C Key
Clear
C Key
Clear
C Key
Clear

Publicité

Table des Matières
loading

Table des Matières