Instructions For Care - DETOMASO DIGITAL DT1009 Instructions D'entretien

eN
Shortening a metal link bracelet - continued -
In order to shorten the bracelet, push out the pins on the side of the bracelet using a sharp object.
Please observe the arrows engraved on the reverse of the metal bracelet or on the labels. After the
bracelet has been shortened (links removed) simply push the pins back into place.
Bracelets with screws:
Use a suitable screwdriver to release the screws, shorten the bracelet (remove links) and then screw
the bracelet back together.

Instructions for care

Your watch is a high precision electronic and mechanical masterpiece and should serve you well for
a long time.
Please note that your guarantee will be void in the event of improper use, unauthorised tampering and
improper battery replacement and does not cover glass breakages.
In the event of a guarantee claim please submit your invoice and the guarantee card. Please keep your
watch away from magnetic fields, heat, water and chemicals. Do not submit it to sudden impact or
abrasion. Watches should not be worn in bed.
If a battery operated watch stops or the low battery indicator shows, it should be taken to a specialist
as soon as possible to prevent the battery from causing damage in the watch or the environment.
Batteries should be replaced by a specialist at regular intervals of approx. 1 – 1 ½ years.
The seals can then be checked and, if necessary, replaced at the same time.
In the event of condensation forming underneath the glass (misting), the watch should be taken to
a specialist as soon as possible to prevent the moisture from causing further damage. The crown
should always be firmly pressed in or screwed tight during use. The leather watch strap is subject to
normal wear and tear and, being a natural product, is particularly susceptible to moisture, perspirati-
on, chemicals and abrasion.
It is not indefinitely durable and for reasons of hygiene should be replaced every 6-12 months,
depending on how often it is worn. The retaining pins should be checked and, if necessary, replaced
at the same time.
17