Changing Oil - TEFAL OLEOCLEAN INOX & DESIGN Mode D'emploi

5085657 Oleoclean.qxp
Eng
- Outside the appliance: Leave the oil to cool for approximately 3 hours, then turn
the Oil Box control switch to Oil box position and take out the container.
(fig.29-30)
!
When the oil container is full of oil do not submerge it under water. To clean it,
wipe it with a kitchen paper towel or damp cloth.
!
Carry the container with both hands. Store it in a cool dry place away from the light.
• Wait at least 3 hours before taking the full container out of the appliance.
Transport it with care.
• To re-use the oil, take out the container with care.
Unscrew the oil box cap and empty the oil in the fryer bowl. (fig.31-32)
• For solid fat, remove the lid from the container. Turn the container over and
press it to loosen the fat. Cut it into pieces and melt it in a separate pan. Then,
pour it into the bowl. (fig.33-34)
!
Never put the OIL BOX in a microwave oven.
• Insert the empty container in the fryer, with its lid and cap in position. Place the
Oil Box control switch on the Fry position. (fig.17)
!
Do not pour used oil down the sink. Drain it into a suitable container.

Changing oil:

• Do not pour used oil/fat into the sink. Leave it to cool, and throw it away with
household waste-according to the local community regulations.
CAUTION
• We recommend changing the oil/fat after a maximum of 10 to 12 uses.
If using sunflower oil, ensure the oil is changed after every 5 uses.
Magiclean: very easy to clean.
• The lid, the bowl, the housing, the frying basket and the Oil Box are dishwasher
safe. (fig.36)
• The oil filter grid located in the removable bowl is fixed.
Do not try to dismantle it. (fig.37)
• After cleaning, press on the red button under the fryer to release any water in
the bowl. (fig.8)
!
Before filling the fryer bowl, always check to ensure the red button under the
fryer is in the correct position.
22
14/01/09 16:04 Page 24