ESAB Origo Mig C420 PRO Manuel D'instructions page 24

TM
Origo Mig C420 PRO
Item Denomination
A Feed / pressure roller
B Gear adapter
C Inlet nozzle
D Drive gear
E Intermediate nozzle
F Outlet nozzle
G Liner
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for
aluminium wires MUST be used. It is recommended to use 3m long welding gun for
aluminium wires, equipped with appropriate wear parts.
C420Pwe1
Ordering no. Notes
0459 052 001 Ø 0.6 & 0.8 mm; Fe, Ss & cored wire; V--groove
0459 052 002 Ø 0.8 & 1.0 mm; Fe, Ss & cored wire; V--groove
0459 052 003 Ø 0.9/1.0 & 1.2 mm; Fe, Ss & cored wire; V--groove
0459 052 013 Ø 1.4 & 1.6 mm; Fe, Ss & cored wire; V--groove
0458 825 001 Ø 0.9/1.0 & 1.2 mm; Cored wire; V--groove; knurled
0458 825 002 Ø 1.2 & 1.4 mm; Cored wire; V--groove; knurled
0458 825 003 Ø 1.6 & 2.0 mm; Cored wire; V--groove; knurled
0458 824 001 Ø 0.8 & 0.9/1.0 mm; Al wire; U--groove
0458 824 003 Ø 1.2 & 1.6 mm; Al wire; U--groove
0459 441 880 Replacing 0455 053 880
0455 049 001
0459 440 001 Replacing 0455 052 001
0455 072 002 Fe, Ss & cored wire
0456 615 001 Al wire
0469 837 880 Ø 2.0 mm steel for 0.6--1.6 mm Fe, Ss & cored wire
0469 837 881 Ø 2.0 mm plastic for 0.8--1.6 mm Al wire
0349 303 018 Fe, Ss & cored wire
0455 894 001 Al wire
- - 24 - -
Edition 061130