Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
HB350 FUNCTIONAL
DESCRIPTION
Cutter capacity
Chuck Capacity
No load speed
Power consumption - 1050w
Clamping force
L x H x W
- 8.7/8" x 19.5/16" x 7.11/16"
Weight
Voltage
I
: Integral coolant system, Warranty,
NCLUDES
Carrying case, Allen keys, Safety strap & Guard
• Due to our continuing programme of research and
development, these specifications are subject to change
without notice.
- 1.3/8"
- ½"
- 850 rpm
- 8000N (1800lb)
- 26lb
- 120v
THE BROACH CUTTING CONCEPT
If you are unfamiliar with the use of annular
(or broaching) cutters, take a few minutes to
read this guide - you will benefit from the better
performance and longer life of the tool if you
understand the concept.
Annular cutters only cut material at the
periphery of the hole, rather than converting
the entire hole to shavings. As a result, the time
and energy required to make the hole is lower
than for a traditional twist drill.
The broaching capacity of a machine is
therefore greater than the twist drill capacity.
The slug ejected after the cut also has a higher
scrap value than shavings.
EN
Publicité
Table des Matières
