Publicité
CYLINDER HEAD
3. Install:
Timing chain
Camshaft sprocket
Installation steps:
Turn the crankshaft counterclockwise with
a wrench.
Align the "I" mark a on the rotor with the
stationary pointer b on the crankcase
cover.
Align the match mark c on the camshaft
sprocket with the stationary pointer d on
the cylinder head.
Fit the timing chain 1 onto camshaft
sprocket 2 and install the camshaft
sprocket on the camshaft.
NOTE:
When installing the camshaft sprocket,
keep the timing chain as tense as possible
on the exhaust side.
CAUTION:
Do not turn the crankshaft during instal-
lation of the camshaft. Damage or
improper valve timing will result.
Remove the safety wire from the timing
chain.
4. Install:
Washer
Bolt (camshaft sprocket)
NOTE:
Temporarily
tighten
sprocket) at this point.
4 - 17
ENG
the
bolt
(camshaft
Publicité
Chapitres
