Command And Control Equipment For Gas Burners Lme - baltur BTG 15 Manuel D'instructions

Masquer les pouces Voir aussi pour BTG 15:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

COMMAND AND CONTROL EQUIPMENT FOR GAS BURNERS LME ...

Operation, indications, diagnostics
RED
YELLOW
EK
GREEN
Both lockout reset button (EK) and signal lamp (LED) are located under the transparent cover of the lockout reset button.
There are 2 diagnostics choices:
1. Visual indication directly on the reset button: operation and diagnostics of device status.
2. Diagnostics with interface: in this case the OCI400 connecting cable is necessary and it can be connected to a PC with ACS400
software, or to gas analysers of different manufacturers (see technical sheet 7614).
Visual diagnostics:
During operation, the command and control device phase is indicated on the reset button. The following table lists all colour sequences
and their meaning. To activate the diagnostics function, hold the reset button down for at least 3 seconds. A quick red flashing indicates
that the function is active (see data sheet 7614). Likewise, hold the reset button down for at least 3 seconds to deactivate the function (the
switching will be indicated with a flashing yellow light).
Colour code table
Command and control device status indication
Status
Waiting time "tw", other waiting states
Ignition phase
Correct operation, current strength of flame detector above the
minimum allowed value
Incorrect operation, current strength of flame detector below the
minimum allowed value
Power supply voltage reduction
Burner shut down condition
Error code output (refer to «Error code table»)
Extraneous light upon burner start-up
Interface diagnostics
No light
Red
The reset button «EK...» is the main element to access all diagnostic functions (activation and
deactivation), and serves to unlock the command and control device.
The multicoloured «LED» indicates the command and control device status during both
operation and diagnostics functions.
Operating
position
Diagnostic
Yellow
Green
0006080876_201403
Operating
position
PC interface/diagnostic
analyser
Colour code
. . . . . . . . . . . . . . . .
15 / 24
Colour
No light
Flashing yellow
Green
Flashing green
Alternating Yellow and Red
Red
Flashing red
Alternating Green and Red
Flashing red light

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Btg 20Btg 28

Table des Matières