Declaration Of Compliance; Technical Gas Data Table; Installing The Appliance; Checking Correct Ventilation - Lotus CW-74G Instructions Pour L'installation Et L'emploi

Masquer les pouces Voir aussi pour CW-74G:

Instructions pour l'installation et l'emploi (31 pages)

Table des Matières

Les langues disponibles

The manufacturer declares that the appliances are compliant with the prescriptions of the EEC norm 90/396. The

installation must be done observing the norms in force particularly concerning room ventilation and discharging gas

emissions.

N.B.: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect

installation, maintenance or use of the appliance and alterations, as in all the other cases considered in the items of our

sales conditions.

MODEL

DIMENSIONS

GAS CONNECTION

TOTAL NOMINAL POWER (Kw)

•

The operations for installing, conversions for use with other types of gas and starting up must be done only by

qualified personnel whose qualifications comply with the norms in force.

•

The gas installation, the electrical connections and the rooms in which the appliances are installed must comply

with the norms in force in the Country in which the installation is carried out; above all, the appliance must be

installed in a well ventilated room, preferably under an extractor hood, so as to ensure the complete extraction of

gas emissions which are formed during combustion. The air necessary for combustion is 2m3/h per kW of power

installed.

Ensure that the air outlets in the place of work are sufficient to guarantee the necessary air exchange, as stated in

paragraph 4.3 of the UNI-CIG. norm 8723 standard.

We remind you that appliances installed in buildings for public use must meet the following requirements:

In Italy:

1) Installation regulations

Installation and maintenance of the appliance must be carried out following the correct procedures and written

regulations texts in use, in particular:

•

safety norms against fire and panic in public buildings

general instructions

For all appliances:

the connection, installing the systems and the appliances, ventilation and discharging fumes must be carried out in

accordance with the manufacturer's instructions by professionally specialized personnel in compliance with the

UNI-CIG norm 8723. The electrical part must comply with the E.I.C. norms in force; furthermore, the current

regulations laid down by the Fire Brigade must be observed.

In Switzerland:

The appliance must be installed in accordance with the safety norms in force.

Installation, conversion and repairs of appliances for professional use, as also the withdrawal for breakdowns and gas

supply connections may be done only on the base of a maintenance contract drawn up with an authorized sales agent

and observing the technical norms.

The appliance may be installed as a single element or in series with other appliances of our production. It is necessary to

observe a minimum distance of 10 cm from the appliance to prevent contact with walls of inflammable material;

adequate measures must also be taken to ensure thermal insulation of inflammable parts, such as the installation of a

protection against radiation; particular attention must be paid in installing the appliances adequately and safely. The feet

are adjustable in height so that differences in level can be avoided.