How To Level Your Refrigerator; How To Adjust The Temperature Controls - Amana DRS246RBB Manuel Du Propriétaire

How to Connect the Water Supply
3
Confirm secure attachment by pulling on
tubing.

How to Level Your Refrigerator

DO NOT
Materials Needed
3
8
1
Remove toe grille and bottom hinge covers
(see previous instructions)
2
Turn both front adjustment
screws (A) clockwise to raise
and counterclockwise to
lower.
What if my doors are not aligned?
• Locate the higher door, and turn front adjustment screw
counterclockwise. Continue until doors are level.
• If bottom of adjustment range is reached, and doors are
not level–raise opposite door by turning front adjustment
screw clockwise.
• Replace toe grille

How to Adjust the Temperature Controls

1
Locate refrigerator and freezer controls on
upper left wall of fresh food section, and
set both controls to 4.
IMPORTANT: Neither section will cool if freezer control is
set to
2
Allow 24 hours for temperatures to stabilize.
IMPORTANT: Due to design of unit, always start temperature
adjustments with freezer section.
3
Check to see if freezer temperature is 0° to
2° F (-17° to -16° C).
Installing Your Refrigerator
!
CAUTION
.
$
continued
4
Turn on water supply and
correct any leaks.
3
Turn both rear adjustment
screws (B) clockwise to raise
and counterclockwise to
lower.
4
Check with level to verify
back for proper door closure.
What if my unit rocks?
• Turn rear adjustment screw clockwise to raise rocking
corner.
• Replace toe grille.
4
Check to see that fresh food section
is 38° to 40° F (3° to 4° C).
5
Repeat process, as necessary.
How do I perform a temperature test?
Materials needed
• 2 thermometers measuring -5° to 50°F (-21° to 10°C)
• 2 drinking glasses
For Freezer
• Place thermometer in glass
of vegetable oil in middle
of freezer and continue
with step 3 of Temperature
Adjustment section.
7
%
/ " tilt to the
1
4
For Refrigerator
• Place thermometer in glass
of water in middle of unit
and continue with step 3
of Temperature Adjustment
section.