Putting Into Operation - Venta ORIGINAL CONNECT AH510 Mode D'emploi

A
B

PUTTING INTO OPERATION

A Fill lower housing 7 with tap water up to maximum WATERLINE marking
and add 50 ml hygiene additive 8 (complete content of bottle).
!
Never fill the appliance
before taking off the upper
housing!
B Insert disk stack 5 into lower housing 7 and place upper housing 2 onto
lower housing 7.
C Connect the switching power supply 3 to the mains and switch on the
appliance
by tapping the power button in the display 1.
Only once the appliance is connected to the mains will the power
i
button
26 EN
light up to switch the appliance on and off.

C
Adding the hygiene additive is
i
very important, because this
optimally humidifies the air.
!