Putting Into Operation - Venta KUUBE XL-T Manuel D'utilisation

PUTTING INTO OPERATION

01 08
Attention!
Make sure that the appliance is switched off and the power cord is
disconnected.
01 Unpack the appliance and set it up.
02 Open the evaporator compartment 3 and remove the water tank 4.
03 Open the water tank 4 and fill up to the MAX marker with water.
04 Close the water tank 4 securely.
05 Insert the water tank 4 into the water basin 6 and close the evaporator
compartment 3.
Inserting the fragrance: Open the fragrance compartment 7. Twist open the
06
fragrance cap and insert it into the fragrance holder 8. Insert up to three
fragrances into the fragrance holder 8. Close the fragrance compartment 7.
The display 1 can be adjusted to three positions.
07
The power cable can be adjusted to the desired length by winding it up in
08
the cable compartment 10.
Move the appliance with the transportation wheels 13 to the desired place.
Lift the appliance slightly on the right sight.
Attention! The coupling of the mains cable must be plugged firmly into the device!
Please remove the protective foil for battery and remote
control of the remote control.
Connect the power plug and switch on the appliance
at the on/off switch 2 or with the remote control 12.
ATTENTION! It may take about a minute for the device
to start and for the "Fill Tank" indicator in red or yellow to
be extinguished. A gurgling sound may be heard, but this does not represent a
quality defect.
Description of UVC lamp
The Airwasher features a built-in UVC lamp 9. The UVC lamp is designed for a
hygienically flawless operation of the Airwasher and prevents the formation of
germs and bacteria in the water. It is active for 4 hours a day.
Attention! Disconnect from the mains before performing any cleaning work. Do
not look directly at the UVC light.
7 US
ON/OFF
Set fan stage