Displays, Functions & Settings - Venta ORIGINAL CONNECT AH510 Mode D'emploi

DISPLAYS, FUNCTIONS
& SETTINGS
1
2
3
4
5
Display
1 Humidity
2 Power level
3 - and +
4 SLEEP
5

Function
Display the humidity in the room (0 – 99 %).
Display speeds 1 - 2 - 3.
Set the power level by tapping:
- reduces and + increases the speed.
Tap to turn the sleep mode on or off.
ON: The appliance dims the display lighting and reduces
the power level to 1.
Power level 2 can be changed manually with the + or
i
- button 3. Automatic mode 7 is not possible.
Set the display brightness you want for sleep mode:
press the SLEEP button for 3 sec. until the readings
HUMIDITY 1 and SLEEP 4 flash. Set the brightness of the
display between 0 and 10 with the - or + button 3, which
is indicated by flashing in HUMIDITY 1. Press the SLEEP
button again for 3 sec. until the readings HUMIDITY 1 and
SLEEP 4 are continuously illuminated and the humidity
reading for the room is displayed again in HUMIDITY 1.
OFF: Bright display illumination and appliance runs in
power levels 1 – 3.
Switch the appliance on or off by tapping the power
button.
6
3
7
EN 27