Setting The Cutting Length; Comb Attachments; Cleaning And Care - Aesculap Akkurata GT405 Traduction De La Notice Originale

4.4 Setting the cutting length

The cutting length is adjustable in
three stages:
l: 0.5 mm
ll: 1.5 mm
lll: 2.5 mm
Slide lever 5 to the desired posi-
tion.

4.5 Comb attachments

The comb attachments 14 with the
lengths 4, 8, 12, 16 and 20 mm can
be pushed onto the blade set 4.
Please note: The cutting lengths of
the comb attachment and the cut-
ting length set on the trimmer must
be added together.
Example: Comb attachment 20 mm and lever 5 in posi-
tion III (2.5 mm) results in a cutting length of 22.5 mm.
Switch off the trimmer and push the desired comb at-
tachment onto the blade set 4.
You can now start trimming hair with the trimmer in the
usual way.

5. Cleaning and care

To ensure proper functioning of the
appliance, the blade set must be cleaned
regularly and oiled in the appropriate
WARNING
places. Failure to clean the blade set
regularly results in excessive wear on
blade set and motor
17