JB Systems DJ-Kontrol 3S Mode D'emploi page 5

ENGLISH
CONNECTIONS
Please follow the connection diagram below to connect the "DJ-KONTROL 3S":
 Use the supplied USB-cable to connect the controller, via the USB-connector (45), to your computer.
 Connect the cinch outputs (46) or XLR outputs (47) to your audio amplifier or powered speakers.
 Put the output selector in the desired position.
 Connect your microphone (if any) to the mic input (11) on the front panel of the controller.
 Connect your headphones to the headphones output (16) on the front panel on the controller.
 Use the supplied 5Vdc adapter to connect the DC-input (49) of the controller to the mains.
See the chapter CONFIGURING VIRTUALDJ to learn how to setup the audio routing in the software.
INSTALLING VIRTUALDJ
Installation on your computer:
Remark: The installation procedure below is explained for Windows. However, apart from some small
differences, the procedure under MAC OS is very similar.
Insert the CD-ROM in your computer: normally the installation should start automatically. If the installation
does not start automatically, browse the CD-ROM and double click the "install_virtualdj_le_v7.0.X.exe" file
(install_virtualdj_le_v7.0.X.pkg for MAC users). File name can be slightly different) Follow the instructions on
the screen:
Click the "NEXT" button
Press the "INSTALL" button
JB SYSTEMS
®

Read and accept the agreement"

Press the "FINISH" button.
3/58
USER MANUAL

Choose "Typical" installation.
DJ-KONTROL 3S