JB Systems DJ-Kontrol 3S Mode D'emploi page 10

ENGLISH
 Delete a cue point: press the CUE+SHIFT buttons together  the stored cue point will be deleted.
38. SHIFT button: used to activate "extra functions" on some buttons. The extra functions are usually
written in the grey zone of the buttons.
39. KEY LOCK button: (Master tempo) activates the pitch lock function. This function allows you to make
adjustments to a tracks speed using the SPEED fader (35) without altering the tonal pitch.
40. EFFECT ON/OFF button: used to switch the selected effect on/off.
41. EFFECT SELECT button: used to select one of the available effects.
42. PARAMETER1 knob: different functions available:
 Turn PARAMETER knob: adjust the parameter 1 of the selected effect.
 Turn PARAMETER knob while SHIFT is pressed: to adjust the frequency of the filter effect.
43. PARAMETER2 knob: different functions available:
 Turn PARAMETER knob: adjust the parameter 2 of the selected effect.
 Turn PARAMETER knob while SHIFT is pressed: to adjust the tonal pitch of the music.
FUNCTIONS (REAR)
44. USB connection: B-type USB-connector. Please use the supplied USB cable to connect the controller
to your computer.
Remark: if you are using a USB hub, make sure it is a powered hub. Otherwise you may experience
unexpected problems.
45. UNBALANCED MASTER output: unbalanced cinch/RCA stereo output, used to connect your audio
amplifier. You can use this output if the signal cables to your amplifier are not longer than 2m or 3m.
46. BALANCED MASTER output: balanced XLR stereo output, used to connect your audio amplifier or
amplified loudspeakers. A balanced signal connection is less sensitive to all kinds of interferences
coming from all kinds of sources. Use this output if your amplifier or powered loudspeakers have
balanced inputs (XLR) and the length of the signal cables exceeds 3m.
47. RCA/XLR switch: used to selected the desired master output (RCA or XLR)
JB SYSTEMS
®
8/58
USER MANUAL
DJ-KONTROL 3S