Installation; Electrical Installation - Electrolux EMT25507 Notice D'utilisation

If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
customer service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. INSTALLATION

CAUTION!
Do not block the air vents. If you
do that, the appliance can over-
heat.
CAUTION!
Do not connect the appliance to
adapters or extension leads. This
can cause overloading and risk of
fire.
• The appliance is for built-in use only.
• The fitted cabinet must not have a back
wall behind the appliance.
• Put the appliance far away from steam,
hot air and water splashes.
• If you transport the appliance in cold
weather, do not activate it immediately
after the installation. Let is stand in the
room temperature and absorb the heat.

13.1 Electrical installation

WARNING!
Only a qualified person must do
the electrical installation.
The manufacturer is not responsi-
ble if you do not follow the safety
precautions from the chapter
"Safety Information".
This appliance is supplied with a main ca-
ble and main plug.
1. Check if the dimensions of the furni-
ture meet the installation distances.
The necessary data for the customer
service center is on the rating plate on the
appliance.
.........................................
.........................................
.........................................
C
D
A
B
Installation distances
Dimension
A
B
C
D
2. Put the template on the bottom of
cabinet and mark the spots for
screws. Remove the template and fix
the bracket with the screws.
ENGLISH 35
mm
380 + 2
560 + 8
550
45