Rear / Bottom Panel - Samsung HW-J7500R Manuel D'utilisation

DESCRIPTIONS

REAR / BOTTOM PANEL

Connect to the digital (optical) output of an external device.
Outputs digital video and audio signals simultaneously using an
Inputs digital video and audio signals simultaneously using an HDMI
cable. Use when connecting a supported external device.
Lets you connect to a network using a LAN cable.
Connect to the Analog output of an external device.
Wi-Fi SETUP
Press this button to
connect your Soundbar to
your network using Wi-Fi
setup. (Requires a smart
device and the Samsung
Multiroom app.
See page 27.)
● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
● Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it
is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
OPTICAL IN (D.IN)
HDMI OUT (TV-ARC)
Wi-Fi SETUP SPK ADD
DC 24V
SPK ADD
Press the button to connect
the Soundbar to a Samsung
HUB (purchased separately)
or a network. (Requires a
smart device and the
Samsung Multiroom app.
See page 27.)
HDMI cable.
HDMI IN
LAN
AUX IN
SERVICE
DC 24V
(Power Supply In)
Connect the DC power
adaptor to the power
supply jack, and then
connect the AC power
adaptor plug to a wall
outlet.
8
LABEL
SERVICE
To upgrade the product's
software through the
USB Port.