Rear / Bottom Panel - Samsung HW-K650 Manuel D'utilisation

rEAr / BoTTom PAnEL

DigitaL aUDiO in (OPtiCaL)
Connect to the digital (optical) output of
To upgrade the product's software
through the USB Port.
Connect to the Analogue output of an
external device.
LaBeL
Wi-fi SetUP
Press this button to
connect your Soundbar to
your network using Wi-fi
setup. (requires a smart
device and the Samsung
multiroom app.
See page 27.)
● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between components
are complete.
● make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it
is hanging with the AC cord input facing upwards, water or other foreign substances could enter the
Adapter and cause the Adapter to malfunction.
an external device.
SerViCe
aUX in
Wi-Fi SETUP SPK ADD
SPK aDD
Press the button to connect
the Soundbar to a Samsung
HUB (purchased separately)
or a network. (requires a
smart device and the
Samsung multiroom app.
See page 27.)
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
AUX IN
DC 24V
HDMI IN
DIGITAL AUDIO IN
(OPTICAL)
SERVICE
HDMI OUT
Wi-Fi SETUP SPK ADD
(TV-ARC)
AUX IN
HDMI IN
HDMI OUT
(TV-ARC)
outputs digital video and audio signals
simultaneously using an HDmI cable.
7
DESCRIPTIONS
DC 24V
(Power Supply in)
Connect the DC power
adaptor to the power supply
jack, and then connect the
AC power adaptor plug to a
wall outlet.
DC 24V
HDMi in
Inputs digital video and
audio signals
simultaneously using an
HDmI cable. Use when
connecting a supported
external device.
HDMi OUt (tV-arC)