F.Bertazzoni REF24BMFXNV Mode D'emploi page 9

①
②
3) Remove the screws
and hinge . If the refrigerator
has an on-door display, you will have to pass the
connector through the hinge
the upper door with your hand when installing).
MODEL WITHOUT DISPLAY
Special flange screws
Upper hinge
4) Free the upper door from the middle hinge by
carefully lifting the door straight up. Then place the
upper door on a smooth surface with its upper cover
facing upwards.
5) If the refrigerator has an on-door display, take
a screw hole cover (right) from the plastic bag and
install it on the top right side of the refrigerator body.
Then remove the screw hole cover (left) from the top
left side of the appliance and put it into the plastic bag.
If the refrigerator has an internal display, pull out the
Self-tapping screws
Upper hinge cover
hole. (Please hold
MODEL WITH DISPLAY
Special flange screws
Upper hinge
Electrical connector
screw hole cover from the left side and install it on
the right side.
MODEL WITH DISPLAY
Screw hole cover
(right)
MODEL WITHOUT DISPLAY
Scr
Screw hole cover
Scr
6) If the refrigerator has an on-door display, remove
part from the top left side of the upper cover and
take out part . Then remove part
into the top right side of the upper cover. Using the
above operation as reference, install part
on to the top left side of the upper cover. Install
part on the top right side of the upper cover. If the
refrigerator has an internal display, skip this step.
MODEL WITH DISPLAY
Corner Cover (left)
Electrical connector (left)
Corner Cover (right)
Electrical connector (right)
Screw hole cover
(left)
Screw hole cover
and put part
and part
9
EN