Options And Accessories; Rainproof Hood; Installation - Daikin UATYA-BBAY1 Manuel D'installation, D'utilisation Et D'entretien

6

OPTIONS AND ACCESSORIES

The units are designed to fit options/accessories.
Some options/accessories are assembled at the factory when the unit is manufactured; others must/can be assembled
at the time of unit installation or even at a later stage.
This chapter is intended to provide the reader with all instructions relating to the various options/accessories.

6.1 Rainproof hood

6.1.1

Installation

A rainproof hood can be fitted on the opening for the passage of external air.
Protection is achieved with hoods; the number of elements forming the guard depends on the size of the air passage.
The guard is supplied in a separate kit for fitting by the installer.
In addition to the hoods, the kit includes a protective mesh and self-drilling screws for fixing.
The protective mesh is to be fixed between the guard and the frame of the unit and cover the entire opening.
Use a 6 mm screwdriver with socket to fix it.
To fit correctly:
- Rest the mesh filter against the edge of the external air opening;
- begin fitting from the upper part of the opening;
- using the holes on each element of the guard, secure them to the frame of the unit with the self-drilling screws
provided.
- repeat this operation for all the elements of the guard.
Translation from original instructions
Packaged Rooftop
46
Fig. 22 Rain guard
We reserve the right to make changes without any prior notice.
4P645202-2
UATYA