Safety Information; Your New Appliance - Siemens DE 18500 Notice D'utilisation

Please read the Operating Instructions carefully before using the appliance!

Safety information

I
Installation and first commissioning should only be undertaken by an authorized technician
according to the attached Assembly Instructions.
I
Repairs must only be undertaken by an authorized technician to exclude any potential risks
involved.
I
The continuous-flow heater must only be installed in a frost-free room.
I
The tap mixer and warm water pipe can get hot.
Keep children away from the appliance.

Your new appliance

I
The electronic "comfort plus" continuous-flow heater warms water while it is passing through
the appliance.
I
The continuous-flow switches itself on and heats the water when the warm water tap is
opened. It switches itself off again when the water tap is closed.
How to operate the continuous-flow heater
Select the shower temperature
The default setting for the water temperature during the first start-
up is 39 °C.
I
The rotary knob is used to infinitely select the desired temper-
ature from 30 °C to 60 °C.
Info: The temperature shown in the display is the water temperature
inside the appliance; the temperature of the water leaving the tap
can vary from this due to heat losses in the pipework.
Ideal temperature
You also have the option of choosing between two preset temper-
atures.
40 °C = Button 1
60 °C = Button 2
7