Commissioning - Bartscher XCH-050 Mode D'emploi

ENG
2.4 Commissioning the equipment
Before putting the oven into operation, you should carefully carry out all the
necessary checks to ascertain the conformity of the equipment and installa-
tion of the appliance as provided by law and according to the technical and
safety instructions given in this manual.
You should also check that the compliance of the following:
The ambient temperature in the location where the appliance is installed
should be greater than +4 ° C.
The cooking chamber should be empty.
All packages must have been completely removed, including the protective
film applied on appliance's walls.
The vents and slits should be open and free of obstructions.
The parts of the appliance that were disassembled for installation purposes
should be reinstalled.
The master switch should be closed and the water shut-off valve upstream of
the unit must be opened.
In the moment in which the unit receives the supply voltage, it may emit a
sound signal.
7