Operating Your Spa
5.
Hook up the female end of a garden hose to the
drain fitting.
6.
Place the other end of the garden hose where you
would like the water to drain to.
7.
Twist the hose-bib fixture counterclockwise and pull
to open the drain.
8.
Let spa drain completely, then remove garden
hose.
9.
Twist the hose-bib fixture clockwise to close it.
Winterizing (Cold Climate Draining)
In many areas, the temperature drops below 0°C. We
recommend that you always have your spa full of water
and running at normal spa temperatures (26.7°C to
37.8°C). This will help reduce the risk of freezing in
your spa and your spa's equipment.
Warning: If you find the need to drain your spa,
please be aware of the potential of freezing in
your spas equipment and plumbing . Even if the
directions below are followed perfectly, there is
no guarantee that your spa will not suffer freeze
damage .
Freeze damage is not covered by your warranty .
1.
Open all filter covers.
Page 18
2.
Remove the filter baskets and filters.
3.
Drain your spa completely as described in the
instructions above.
4.
Remove drain plugs from the front of the pumps.
5.
Disconnect the unions from both sides of the pump.
6.
Use a wet/dry vacuum to blow any remaining water
out of the jets and equipment area.
Cover your spa with a good spa cover and an all-
weather tarp to ensure that neither rain nor snow enters
the spa.
2007 Portable Spa Owner's Manual
LTR20071001, Rev. B