Cleaning - Bartscher 200240 Mode D'emploi


The device is equipped with overheating protection. In case of accidental start
of the device without water in the basin or with water level too low, the function
will be activated and the device will switch off.
Wait for the device to cool down and drain the water from the basin to an appropriate
tank through the drain tap. Press the RESET button (using an insulated tool, e.g.
unipolar voltage tester or insulated screwdriver) through the opening in the bottom
plate. You can hear a distinctive "click"sound. The device is again ready for use.

6. Cleaning

WARNING!
Before cleaning the device, disconnect it from the power
supply (unplug!).
The device is not suited for direct washing via water jets.
Protect the device from the water penetration.
o Clean the device regularly.
o Caution! Leave the device and water in the basin to cool down or you risk burns!
o Drain the water to an appropriate tank through the drain tap.
o Clean the basin with warm water and mild cleaning agent. Rinse with clear water
and remove the water through the drain tap.
o Clean the body of the device with a soft, damp cloth.
o Always use a soft cloth and never use coarse cleaning agents that could damage or
scratch the surfaces of the device.
o Finally, dry and polish the surface with a soft, dry cloth.
o When using the device frequently, regularly remove the scale that accumulates at
the bottom of the basin. Use a vinegar-water solution or popular descaler. Follow
the manufacturer's instructions on how to use the descaler.
- 34 -