Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
5.2 Operation
Before the first use
Before the first use, clean the device thoroughly. Follow instructions in section
6 "Cleaning"
.
Device start-up
Fill up the water basin to the "MIN" marking.
CAUTION!
Make sure the water level does not drop below "MIN"! Check it regularly
during operation.
Never use the device without water!
NOTE!
Fill up the basin with warm water to save time and energy!
- 32 -