Install The Blower Tube; Install The Battery Pack; Remove The Battery Pack; Operation - GreenWorks BL40B02 Manuel D'opérateur

WARNING
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
10.2

INSTALL THE BLOWER TUBE

1. Move the tube until the tube release button engages into
the slot.
2. Connect the nozzle to the tube until the latch on the tube
engages into the opening on the nozzle.
10.3

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read and understand the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
English
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
10.4
1. Push and hold the battery release button (7).
2. Remove the battery pack from the machine.
11
Make sure the blower tube is in position before operation.
11.1
1. Pull the trigger (1) to start the machine.
2. Pull the trigger to increase the speed.
3. Release the trigger to decrease the speed.
7
11.2
1. Release the trigger to stop the machine.
Wait until the motor stops after you stop the machine.
11.3
1. Push the turbo button, the machine is at the highest speed.
2. Release the turbo button, the machine is at the normal
speed.
Using the turbo button drains the battery the fastest. Only
use the turbo button when needed.
7

REMOVE THE BATTERY PACK

OPERATION

WARNING

START THE MACHINE

2
3

STOP THE MACHINE

NOTE

TURBO BUTTON

NOTE
EN
1