Frost Protection Function; Overflow Protection Function - HTW P14 Serie Mode D'emploi

II. Operating Instructions of the Remote Control
The remote control Panel is as follows:
Instructions of key operation of the high-quality remote control are as follows:
1. Power:
Press the key to turn on or turn off the machine.
2. Timer:
press the key to set timing.
3. Down:
press the key to reduce temperature and timing set value.
4. Mode: press the key to switch between cooling, fan, dehumidifying mode.
5. Up:
press the key to increase temperature and timing set value.
6. Fan: press the key to select high, low wind speed.
7. Sleep Mode:
III. A Variety of Protection Functions

3.1 Frost Protection Function:

In cooling, dehumidifying or economic power saving mode, if the temperature of the exhaust
pipe is too low, the machine will automatically enter protection status; if the temperature of the
exhaust pipe rises to a certain temperature, it can automatically revert to normal operation.

3.2 Overflow Protection Function:

When water in the water pan exceeds the warning level, the machine will automatically sound
an alarm, and the "FULL" indicator light will flash. At this point, you need to move the drainage
pipe connecting the machine or the water outlet to sewer or other drainage area to empty the
water (details see Drainage Instructions at the end of this chapter). After the water is emptied,
the machine will automatically return to the original state.
3.3 Automatic Defrosting (cooling models have this function):
The machine has automatic defrosting function.
3.4. Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection func-
tion after the compressor is turned off.
Press the key to turn on the sleep mode.
24