E
RROR MESSAGES
After any intervention on your printer, do not forget to press the
restart the current print job.
Error
displayed
Resolve error,
Paper tray
then press
empty
PRINT key to
resume printing
Resolve error,
then press
Paper jam
PRINT key to
resume printing
Resolve error,
then press
Check ribbon
PRINT key to
resume printing
Resolve error,
then press
End of ribbon
PRINT key to
resume printing
Resolve error,
then press
Ribbon error
PRINT key to
resume printing
Resolve error,
then press
Cassette error
PRINT key to
resume printing
Resolve error,
Insert ribbon
then press
parameter card
PRINT key to
resume printing
Card empty
Remove card
Counter
Remove card
saturated
Card
Remove card
unreadable (01)
Card
Remove card
unreadable (02)
Error
Error type
Type
Paper
Paper
Ribbon
Ribbon
Ribbon
Ribbon
Ribbon
SmartCard
SmartCard
SmartCard
SmartCard
- 29 -
Action
Check that the paper has been
correctly inserted in the loading
tray.
Remove any paper jammed in
printer (do not reuse this sheet of
paper).
Insert a new film cartridge or
replace the current one.
Replace the film cartridge with a
new one.
Check that the film cartridge is
correctly inserted.
If error persists: replace the
cartridge.
Check that the cartridge is correctly
inserted and that the locking lever is
locked.
The selected number of photos is
greater than the remaining ribbon
capacity to print all photos.
The smart card has already been
used. Remove the inserted card and
insert a valid smart card.
The authorized print quantity has
been reached.
Data transfer error. Remove the
inserted card and insert a valid
smart card.
Data transfer error. Remove the
inserted card and insert a valid
smart card.
key to