Set The Photo Quality - Sagem PHOTO EASY 255 Livret D'utilisation

S
ET THE PHOTO QUALITY
This menu lets you adjust the colour parameters for the selected photo
according to your own requirements.
Press the key and select the Image settings menu using the browser's
or keys.
Select the parameter to be modified using the browser's p or q keys. The
browser's or keys are used to modify the value of the selected parameter.
The key lets you exit the current image setting screen without confirming
the modifications. You then return to the previous menu.
You may set:
• The Contrast of the photo between -2 et +2 ; use the browser's
keys to make your selection.
• The Brightness of the photo between -2 et +2 ; use the browser's
keys to make your selection.
• The Sharpness of the photo between -2 et +2 ; use the browser's
keys to make your selection.
• The Effect of the photo: None for no settings, B&W to print a photo in
black and white, Sepia to print a photo in yellow, magenta and cyan over
three sheets of paper. Use the browser's
selection.
• The Colour of the photo between -2 et +2 ; use the browser's
to make your selection.
• A Frame around your photo : No for no frame, Other frames to print a
predefined frame. Use the browser's
When you have made all the modifications you want, press the
confirm and return to browse mode.
An icon is displayed at the bottom right of the photo to indicate that specific
settings have been made. The modifications made are only valid for the
selected photo.
Warning - If you press the
will automatically return to browse mode without taking any modifications
into account.
or
key while you are setting the parameters you
- 23 -
or keys to make your
or
keys to make your selection.
or
or
or
keys
key to