Setting Close Call (C-C) Band Options; Setting Close Call (C-C) Alert - Options - Albrecht AE355M Mode D'emploi

Setting Close Call (C-C) band Options

Use this menu to select which bands get Close Call checks:
Band
b1 Lo
b2 Air
b3 Hi
b4 UHF
b5 800
1. From Step 4 previously select C-C band. The first band selection displays:
2. Scroll up or down to select bands for Close Call to monitor. Press PROG. The
screen displays that selection and "On".
You cannot turn off all bands. If you turn off all bands b1 Lo (VHF Low Band) is
automatically set to ON.

Setting Close Call (C-C) alert - Options

This menu controls whether the scanner will send an alert tone when a Close Call
signal is detected. The options are:
• - Scanner beeps when a Close Call signal is found.
• - Scanner does not beep when a Close Call signal is found
28
Name
VHF Low Band
AIR Band
VHF High Band
UHF Band
800MHz Band
Frequency (MHz)
25.0000 - 87.2950
108.0000 - 136.9916
137.0000 - 174.0000
406.0000 - 512.0000
806.0000 - 960.0000