Searching Band Tips - Albrecht AE355M Mode D'emploi

If You Want to do
This -
Select a different
bank to scan

Searching Band Tips

If You Want to Do
This
Begin searching
Continue after the
AE355M has stopped
on an active
frequency
Stop searching
Select a different
band to search
22
Here's How -
Use one of the following two methods:
• Use the
frequencies and banks.
• Deactivate the bank(s) you do not want to
listen to, leaving only the desired band
active.
Here's How -
Press the BAND/STEP key. The screen
displays the last known searched band and
then begins searching for an active frequency
in that band.
If the AE355M stops on an active frequency
that you do not want to monitor but you do not
want to lock out, press the SEARCH key or
the UP/DOWN keys.
Press HOLD The scanner stays on the
.
displayed frequency until searching is
resumed. Press HOLD again to resume
searching.
Press the BAND/STEP key multiple times to
search through the available bands.
key to move through