Frequency Band Plan; European Frequency Band Plan; Frequency Table Of All Band Start Setting - Albrecht AE 86 H Mode D'emploi

Frequency Band Plan

European Frequency Band Plan

This band plan can be used in all regions of Europe. The default settings of this band plan are
suitable for many regions, but it can be necessary to select other frequency steps in certain
regions. The European Frequency Band Plan is more suitable for qualified users who know
already which setting parameters they need.
• The receiver has the German Band Plan as default setting. But the European Band
Plan setting is easily available via pressing
• F , release the button (display shows FC ) and then press REGION for longer than 2
seconds.
The two band plans can be toggled without loss of the settings or the memory.
Note: It is not possible to switch the band plans as long as the scanner is in memory mode.

Frequency table of ALL BAND start setting

• The table shows, in which sequence the bands appear in the display after repetitive
pressing of the BAND key.
Band Frequency Range
Name
AIR 108.00 –136.9916
VHF 144.00 - 173.9875
CB10 25.0000 - 29.9900
VLB 66.000 – 87.4875
WFM 87.50 - 107.95
• Within each of the selected bands, you can use the UP / DOWN buttons to select
frequencies with the default channel spacing.
Mode (s)
(MHz)
AM
FM
FM
(default)
AM
FM
WFM
default
possible
Step (KHz)
Step settings
8,33 8.33 / 25 kHz
5, 10, 12.5
20, 25
12,5
10 10 kHz with or
+ 5 kHz without 5 kHz
Offset offset
5, 10, 12.5,
12,5
20, 25 kHz
50 50/100
Application
AIRCRAFT
2m Amateur,
Marine Radio,
Freenet and
kHz
commercial band
CB + 10 METER
VHF LOW BAND
"4 m Band"
FM Broadcast
Radio