Memory Reset - Albrecht AE355M Mode D'emploi

cable again.
•
Release buttons - the present Band Plan number appears
•
Select the desired band plan with
•
Press PROG to store the band plan
•
The Scanner will display the clock and can be switched on as normal.
Please note that any Band Plan change will modify the factory preset channel steps
settings of all bands and the memory contents of the EMG band between (German)
Band Plan 2 and UK / International settings of Band Plan 1.

Memory Reset

For the case that it should be necessary to initialize the memory channels to factory
setting:
•
switch scanner off and disconnect DC cable from power
•
press and hold L/O and PROG, keep them pressed and re-connect the
power cable again.
•
Scanner will show "Clear" while resetting the memories.
Note: This reset will keep the Band Plan as selected.
or
37