Close Call; Close Call Priority; Close Call Do Not Disturb; Close Call Only - Albrecht AE355M Mode D'emploi

Close Call ®
The Close Call feature enables you to search for strong signals close to your location.
These signals could be from a nearby police car or fire engine or other radio source.
Pressing the
1.

Close Call Do Not Disturb

2.

Close Call Priority

3. Close Call Off
Pressing and holding the
Close Call Priority
Repeatedly press
checks every 2 second for a nearby transmission. You may hear a slight break in
audio during this time. If you want to monitor only Close Call hits hold the
longer than 2.5 seconds. The Close Call Priority icon flashes.
Close Call Do Not Disturb
Repeatedly press
periodically make Close Call checks whenever it is not receiving audio in another
mode.

Close Call Only

Press and hold
The scanner is now in Close Call Only mode. It will only try to find Close Call
transmissions. This is also the first step to accessing the Close Call Setup modes.

Setting Up Close Call Modes

1. Press and hold
line of dashes.
2. Press again to display the Close Call menu selections:
• - Select which bands Close Call will check.
• - Select alerts on/off.
3. Use the
4. Press PROG to select a menu and then scroll up or down to view the menu
options. When you have selected a menu option press PROG to set it.
5. Press BAND/STEP key to return to the previous option or press
the Close Call mode selection options.
key activates the Close Call functions in the following order:
key activates Close Call Only mode.
until the Close Call Priority icon
until the Do Not Disturb
until the scanner displays a line of dashes and the icon flashes.
to enter the Close Call Only mode. The screen displays a
or keys to scroll through the menu selections.
displays. The scanner
icon displays. The scanner will
key for
to exit from
27