Focal FPS 2160 Manuel D'utilisation page 10

focal power Symmetric amplifierS
U s e r m a n u a l
WARNING
The cable that links the positive (+) terminal to the battery at the amplifier's "+ BATT" binding post terminal
must ABSOLUTELY be fused (see current ratings listed in the table on page 30) not more than 40cm from the
vehicle's battery. The connections on the fuse-holder must be fully insulated.
3.7 - The implementation phase of the fuse holder for a safe installation can now be started. The fuse holder
should be linked at both end of the positive (+) power cable. It should be placed close to the battery {10 to
40cm. (pic. 7)}. Remove the fuse holder taking care to remove the fuse. Fix the fuse holder's base. Cut the red
power cable between 10 and 40cm. (maximum) from the battery (pic. 7). Keep the remaining scrap cable that
will be used to link the other fuse extremity to the positive terminal of the fuse holder (+) of the vehicle battery.
Strip 1cm (pic. 3), then tin it. Screw the cable to the holder base terminal. Collect the remaining scrap cable.
Strip 1cm (pic. 3), then tin it. Screw the cable to the other holder base terminal.
pic. 7
WARNING
Do not open the amplifier, nor make any modifications to the products. There's a risk of accident, fire or electric
shock.
10
40cm max