Maintenance - Beuchat PHARE 30/50W Ni-MH Manuel D'utilisation

CAUTION :
Do not touch the bulb with fingers. If so, clean it
with a an alcohol soaked cloth and allow it to eva-
porate, before trying the bulb.

Maintenance

After each dive, rinse the Light with fresh water and clean
it with a soft cloth, before opening to charging.
When season the ends, submerge the Light in a fresh
water container for a few hours then clean it and let it dry
completely before storing.
Remove the principal O'ring of the reflector with caution
(do not use a metal tool), clean it, check it and lubricate
without excess (silicone lubrication)
as well as the threading and the span on the Light body,
before replacing and storing the Light.
Use only an o'ring with the same specifications
(Ref.42294) and in good condition ; Replace O'ring
annually.
Maintenance / User guide > 27
waterproof
CAUTION :
The waterproof of the Light is insured by the O'ring
Ref.42294 placed on the reflector in contact with the
body part. Keep the O'ring very clean and well lubri-
cated to ensure a waterproofs seal. Warranty will
voided for failure to maintain O'ring.