Use - Beuchat PHARE 30/50W Ni-MH Manuel D'utilisation

20 > User guide / Use

Use

To turn on and turn off, use the rotating switch placed on
the rear flange.
This rotating switch works on a magnetic system placed
inside the main-body, without soaking through the case,
providing for complete life time waterproof seal.
The turn on/off is secured by a safety slidding lock button.
Before operating or before the dive, slide the safety but-
ton to the left.
To turn on the Light, turn the button to the right "Power-
ON".
To turn off the Light, turn the button to the left "Charge
- OFF".
After the dive and during any transportation or sto-
rage don't forget to lock the rotating switch.
Before any immersion, verify that the port-hole is correct-
ly screwed on the light (until contact between the main
body and the reflector). Tightening must be firm but
without excess.
Lock button
On/Off button
Red indicator
of discharge