CLAS OP 1338 Mode D'emploi page 14

OP 1338
material, the relative technical and safety data sheets of the products to be used
• Modi cations of any kind to the gun or any of its parts
• Continued use of the device after nding faults or malfunctions on the gun or system
• Use of the gun at ambient temperatures outside the admissible range, as speci ed in this manual or in the relative
data sheets of the products to be used.
Before gun start-up and usage, wear the recommended individual safety devices:
• Safety gloves
• Anti-noise ear protectors (optional)
• Safety goggles
The line must be equipped with a pressure reducer and fi lter unit (RF), and valve to shut off air supply.
1. Air supply system
Connect the gun to a compressed air system featuring the following characteristics:
• Maximum air humidity: 5%
• Air temperature range from -10°C to +70°C
• System ow rate of at least 500 l/min
• System equipped with lubricator: lubrication of 3-4 drops of lubricant every 1000 l/min.
The gun is equipped with a ¼ gas male threaded connector, which can be used for connection as needed.
The recommended maximum length of the gun connection tube is 10 m, with a minimum internal section of 6 mm.
The gun operates at a range of 4 to 6 BAR as required, with an approximate air consumption of 200-300 l/min.
CARTRIDGE SPRAY GUN (POLYMER MS)
SART-UP