HBM K-OP Instructions D'emploi page 31

31
Installing optical strain gages
Fig. 4.3.5: Applying the adhesive

Use one of the enclosed small cellophane -sheets to carefully press on the
adhesive. Press with a rolling motion from the center to the edges.

Fig. 4.3.6: Rolling out the adhesive with your finger. Use the enclosed cellophane
as a separating layer
The adhesive escaping in the longitudinal direction fixes and secures the fiber.

You can remove the cellophane as soon as the residual adhesive in the
mixing container has cured.
A2397-3.2 en/de/fr HBM