Maintenance - PMA TB 40 Mode D'emploi

Structure of configuration code:
Input
0
type L (0...900°C)
1
type J (0...900°C)
2
type K (0...1350°C)
3
type N (0...1300°C)
0
4
type S (0...1760°C)
5
type R (0...1760°C)
6
Pt 100 (-99...500°C)
7
+
0...20 mA lin.
8
4...20 mA lin.
+
9
0...10 V lin.
Exit from the configuration level is not via time-out.
With input type re-configuration, parameters must be checked and matched to
the new measuring range, if necessary.
MAINTENANCE / BEHAVIOUR IN CASE OF TROUBLE
The instrument needs no maintenance. The rules to be followed in case of trouble are:
G
Check mains (voltage, frequency and correct connections),
G
check, if all connections are correct,
G
check the correct function of the sensors and output elements,
G
check the configuration word for required function and
G
check the adjusted parameters for required operation.
If the instrument still does not work properly after these checks, shut down the
instrument and replace it.
Cleaning
Housing and front can be cleaned by means of a dry, lint-free cloth. No use of solvents
or cleansing agents!
Default value on delivery
Configuration word
permissible range by pressing keys
required adjustment is finished after pressing key
0 0
After changing, the instrument will be initialized r
( Operation, Initialization). If the configuration was
not changed before pressing key
operating level without initialization is made.
Con1 0000
=
Con1
I
can be changed within the
M
, transition to
D
M
and . The
.
%