Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The external contact is evaluated dynamically and a continuously closed contact
(e.g. a switch) does not lead to resetting. Only a transition to closed position will
cause resetting. The contact must be closed during at least 200 ms.
The process value display is swiched off, when neither an alert alarm was reached
nor the energy supply was interrupted. Process value display is only with alert
alarm and/or limit value reached.
Only possible with S.I.L. switch LOCK=closed (
PASS
If no key is pressed within 30 seconds, display
current process value will be displayed again. For adjusting the limit value,
re-start from the beginning.
FbF
POL
(or
with Pt 100) is displayed and the instrument
0
.
is displayed in the lower line. Now, press keys
r
PASS
PASS
will disappear from the upper display
M
or the new limit value will be effective
Mounting).
45
and confirme by
disappears and the
I
D
or
for
M
.
I
D
or
.
#
Publicité
Table des Matières
