Trox Technik X-CUBE compact Guide D'installation Et De Maintenance page 128

Accessoires pour X-CUBE compact
Establishing the bus communication
Activating accessories
8. Use the supplied bus cable to connect the touch
panel to the corresponding cable entry point
(Fig. 2/4).
9. Switch on the power supply for the accessory.
Turn the mains isolator of the compact unit to Ⅰ/ON
10.
11. Use the touch panel to activate accessories. For
details on using the touch panel refer to the X-
CUBE compact operating manual.
10
128
12.
13.
14.
Accessories for X-CUBE compact units
Centrale de traitement d'air X-CUBE compact
The unit recognises connected accessories auto-
matically. After approx. 5-30 s a message is dis-
played on the touch panel (example shown).
Enter your password and confirm it with ✓.
Default password: 0022
To activate the accessory, press ✓.
ð Once an accessory has been activated, you
can configure it. For details refer to the X-
CUBE compact operating manual.